Загрузка статьи...

13

LED lamp with motion sensor “Luminaire L-D-KEYS-16”

In this article, you will read about the Luminaire L-D-KEYS-16 LED motion sensor lamp.

Luminaire L-D-KEYS-16 is designed to illuminate entrances to apartment buildings or other facilities.

Description:

- It is installed at the entrance to the entrance of an apartment building or other building at a height of up to 210 cm.

- It can be used as independent lighting or when installing the D-KEYS device in the intercom equipment if the camera does not have an IR mode.

- The angle position allows you to highlight the object well.

- The metal case protects against vandalism.

- The lamp has four rows of LEDs, the top row is on all the time, the rest of the LEDs turn on when the motion sensor is triggered.

- The minimum distance of the motion sensor is 1 meter.

With Luminaire L-D-KEYS-16 you will have:

1. High-quality lighting at the entrance for safe and comfortable living of residents.

2. The voltage supplied to the lamp is only 12V, not 220V, as with conventional lamps. This eliminates electric shock in case of damage to the wiring, wetting of conventional lamps. An electric shock from a door due to an ordinary lamp occurs in the housing and communal services system.

3. Returning late at night, you can be sure that the area will be illuminated.

4. The entrance lamp with motion sensor is the optimal solution for an apartment building. The device only works when it is really necessary.

5. The devices are fireproof, they do not heat up and do not emit toxic fumes.

6. The lamp has a waterproof, shock-resistant housing.

Technical features:

- The operation of the motion sensor (turning on a number of LEDs and turning them off) is based on changing the current characteristics by changing the resistance applied to the LEDs.

- There are no switching devices in the lamp - automatic switching devices.

- The operating temperature range is 40 degrees C....+70 degrees C, with relative humidity up to 98%.

- The maximum power consumption is 3 watts, powered by a current source of 14-22V, from 0.25A.

Installation takes place within 1 hour.